Quick Answers to FAQ's
What are the benefits of Ecolife® treated lumber compared to competitive wood treatments?
- The built-in wood stabilizer keeps boards straighter and minimizes cracking, checking and splitting.
- An environmentally advanced, non-metallic preservative, Ecolife (EL2) is extremely effective at .019 pcf retention, a fraction of competing products that use two times the chemicals to achieve adequate above ground product performance.
- The water repellent stabilizer is a built-in part of the preservative system and not an add-on that can vary by treater supplier.
- Fights exposure to the sun and rain and is used in building decks, railings, fence pickets, arbors, trellises, joists and beams.
- Less corrosive to connectors and fasteners and can be used in direct contact with aluminum products, even in continuously wet applications.
- Unsurpassed in effectiveness with virtually no warranty claims in its history.
- Designed for above ground applications six inches or more off the ground.
- Ecolife treated wood is available through 84 Lumber, Lowe's® under the Severe Weather® brand and independent lumberyards. Check where-to-buy to find a retailer near you.
What type of nails or screws do you recommend?
- Use code-approved hot-dipped galvanized or stainless steel corrosion-resistant fasteners and G185 hot-dipped galvanized connectors for exterior use.
- Do not mix metals. If using hot-dipped galvanized fasteners, use hot-dipped galvanized connectors. If using stainless steel fasteners, use stainless steel connectors.
- For coastal installations, use code-approved stainless steel.
How do I remove the grade stamp from my deck?
Light sanding will remove or lighten the grade stamp's appearance.
How long do I need to wait before I stain or paint my deck or fence?
- Allow treated wood to dry prior to application. Test the wood with a few drops of water to see if the wood is dry enough to readily absorb water.
- Typically, treated wood will be dry and ready for finishing 60 days after installation.
- Apply the stain to a small portion of the deck to ensure the wood is sufficiently dry.
- Follow the manufacturer's instructions.
What do you recommend I use to paint or stain my deck?
- Use a good quality oil-based or water-based stain, or exterior wood water sealant product with UV protection to help prevent the wood from turning gray from exposure to the sun.
- Apply a water repellent sealer at least every two years.
- Follow the manufacturer's instructions.
What do you recommend I use to clean my deck?
- Clean annually and keep your deck free from dirt and debris.
- A solution of liquid detergent and water with a stiff brush will remove mildew and dirt.
- For hard to clean surfaces, use a deck brightener containing oxalic acid to retain the wood’s natural beauty.
- Never use household chloride bleaches or foaming cleaners as they can strip the preservatives and damage the wood fibers leaving an unnatural whitewashed appearance.
- Be careful if using a pressure-washer as excessive pressure may cause damage to the wood.
Any tips on installation?
- For exterior project applications, treat all field-cut ends of boards and drilled holes with a brush-on wood preservative. Copper naphthenate formulations are available from home centers, lumber dealers and hardware stores. Deck stains and sealers do not provide adequate protection.
- Butt boards tightly together during installation as they will shrink slightly in width and thickness as they dry out.
- Pre-drill holes at the ends of boards to help prevent splitting.
- Use screws to improve holding performance.
- Install fasteners flush to the wood surface. Do not overdrive fastener.
- Install the un-cut end of support posts in ground contact applications.
- Click here for more details on basic design and construction methods for single-story residential wood decks and significant changes in the 2018 International Residential Code.
What safe practices should I use when working with treated wood?
- Wear gloves, goggles and dust mask when working with treated wood.
- Wash hands thoroughly with mild soap and water after working with treated wood.
- Do not burn or use treated wood debris as mulch.
- Do not use treated wood where it may come into direct or indirect contact with drinking water or a component of food, animal feed or beehives.
- Dispose of treated wood debris in accordance with local regulations.
How do I get rid of mold on my deck?
Mold that you find on pressure treated wood is not an indication of a fungal attack. Mold can grow on the surface of many products including wood (treated and untreated) due to exposure to moisture. To remove mold from your treated deck, use mild soap and water solution and a stiff brush.
Mold and mildew are present everywhere in our environment, both indoors and outdoors. Mold and mildew need four things to thrive: air, water, temperatures between 32 and 120°F, and a food source, conditions that are common wherever humans live, work, and play.
The best way to minimize mold and mildew growth is to control water and food sources. When it comes to mold or mildew on wood decking, water and organic matter are the primary conditions that enable mold and mildew colonies to thrive. To minimize these conditions, make sure water has the ability to flow away from the deck surface and areas surrounding the deck to lessen the absorption of water. Ensure there is adequate ventilation between deck boards and underneath the deck surface, so water can rapidly evaporate.
And since both mold and mildew feed on dead or decaying organic matter, so it is important to keep your deck clean of leaves and debris.
Cleaning Your Deck
To minimize mold on your decking, clean your deck as often as needed, at least twice each year. Climate conditions vary in different regions of the country and may necessitate more periodic cleaning.
Remove leaves, debris, and other organic materials that provide a food source for mold.
If mold is present, there are many commercial products available for cleaning mold. We recommend commercial cleaners containing oxalic acid. For best results, follow the manufacturer’s instructions and use cleaners within their stated shelf life. Do not mix recommended cleaning products together as harmful chemical reactions could occur.
We do not recommend household chloride bleaches or foaming cleaners as they can strip the preservatives and damage the wood fibers leaving an unnatural whitewashed appearance.
To maximize application coverage, remove excessive organic growth or clumps prior to applying the cleaner.
Coatings for High Mold-Prone Environments
For environments prone to high mold growth, there are commercially available coatings and finishes that seal the wood surface when applied and they should be maintained per the manufacturer’s instructions.
- Coatings should be applied within one week of cleaning for best results.
- Prior to coating, properly clean the decking, rinse thoroughly with water and allow to dry completely.
- Sweep off any pollen and debris.
Tips for Minimizing Mold
- Maintain a deck that is dry and clean.
- Ensure gutters / down-spouts and dryer vents do not discharge directly on decks.
- Ensure adequate ventilation under and between decking boards.
- Minimize water puddles under decks and the use of wet mulch up against the deck structure.
- Cleaning a deck just after the last of the major pollen events (when your car doesn't change color from the pollen anymore) will minimize the seasonal outbreak of mold and mildew.
- Periodically rinse off your deck using a garden hose with a spray nozzle, especially after the major pollen events. Skilled professionals may use pressure washers with wide fan tips but in the wrong hands, your deck can be damaged. Exercise extreme caution when using pressure washers.
- Ensure the gaps between the decking boards remain free of debris so that regular rain showers can remove pollen and organic debris between cleanings.
- Avoid fertilizer over-spray.